Ridder's SOLAR BVBA Solar Photovoltaic (PV) System
RIDDERS-SOLAR, always a step closer to perfection!
SOLAR ACCESORIES
 
  Solar cable  
Key Features
  • Dual wall insulation meets industry requirement
  • Electron beam cross-linked
  • Outer insulation provides resistance to U.V., water, ozone, fluids, salt, general weathering
  • Excellent resistance to abrasion
  • Halogen free, flame retardant, low toxicity
  • Very low smoke emissions
  • High strand count conductor provides flexibility and stripping performance
  • Multiple cable diameters available
  • Operating Temperature from -40 °C up to +120 °C
  • Voltage Rating up to 2600 V DC
  • IEC 60228 Class 5 (stranded tin plated copper and flexible)
  • TÜV certified acc. to 2Pfg 1169/08.2007
  • UL certified to 4703
  • 10-14 awg
 
  Locking Connectors For Solar Systems  
  Our photovoltaic connectors are designed to permit time-saving, dependable series cabling of solar panels that are free-standing or integrated into buildings. The connector can be assembled in a variety of configurations, either at the factory or quickly on site by the contractor. Benefit: traditionally high installation costs for solar modules are cut sharply. Available in MC3, MC4 and interchangeable with other brands.  
  Key Features  
 
  • Voltage: max. 1000V
  • Current: up to 30A
  • Diameter: 4mm
  • Wire size: up to 6mm²
  • Protection: IP67 (plugged)
  • Fully touch-protected
  • UL recognized
  • TÜV certified
  • Locking system to prevent inadvertent disconnection
  • Multilam equipped
 
             
  AC Circuit Breakers DC Circuit Breakers RESIDUAL CURRENT
CIRCUIT BREAKER
FUSE DISCONNECTORS
10x38 UP TO 32A
SPRING CLAMP TERMINAL
 
       
  ELECTRONIC 1-PHASE METER
  • Accuracy class 1
  • Installation on DIN-Rail (DIN-EN 50022)
  • 1 S U = 18 mm (DIN 43864)
  • Regard of harmonic content up to 7kHz
ELECTRONIC 3-PHASE METER
  • Frequency: 50Hz, 60Hz, 162/3 Hz
  • Accuracy: active energy, class 1 or 2 according to IEC 62053-21
  • Measuring types: active energy, 1 tarif register with non-reverse ratchet
  • Data retention time: without voltage in the FLASH/EEPROM, at least 20 years
  • Relative humidity: 90% at 40°C, non-condensing
  • Operation mechanical button for operation of display
 
   
       
  Stainless Steal Roof Hooks for inclined roofs  
  Those roof hooks are superb. Not welded, completely made of one piece. Thickness of 5mm, with 8 holes of 8 mm to have a perfect fixation in the wood.
This is only one type of hook, we have several types and can quickly make even your special hooks for special situations. As you maybe need adjustable hooks, longer hooks, higher hooks or whatever. Those hooks last for ever.
 
       
  Fixation screws    
  Zinc-plated or stainless steel screws with TORX screwdriver. When using those screws, you can be sure that you have the strongest connection. Those with thread over the whole length are used to fix the roof hooks into the wood. Available in different lengths and diameters.  
  Zinc-plated or stainless steel screws with TORX screwdriver. When using those screws, you can be sure that you have the strongest connection between two pieces of wood.. Those with partial thread are made to connect wood to wood. Available in different lengths and diameters.  
       
  Polyurethane Glue    
  You know, before putting your roof hooks, you have to make connections between the wooden frame from your roof and the pieces of wood you need to put your roof hooks on it. Those wooden parts are glued to the existing wooden frame. This makes that you should never be afraid that your connections is not good. After gluing, you nail the new pieces of wood and than at the left and right side two special screws. That’s the perfect method. This is how we do it and how it should be done.  
       
  Aluminium beams    
  Aluminium beams, anodised. Available in different dimensions. Grooves are standard made with a width of 8mm and at the widest point 13mm. Very rigid and free of maintenance.  
       
  8mm Connections    
  Those are made from stainless steel and fit perfectly into the aluminium beams. Instead of using the regular square connections with a square of only 13mmx13mm, those connection have 40mm in length and 13mm in width. This makes that the aluminium frame is not forced over a small area when the PV panels are screwed against the aluminium beams. Always use a flat washer and spring washer before putting the screw on it. Those parts are available in different lengths.  
     
  Special structures for flat roofs. Withstands the hardest winds!! Design and construction done by RIDDERS-SOLAR  
  We design and make your flat roof system. With a fixed angle or with a tracking system. Just as you ask. Can also be used for solar boiler systems. Pressure on the roof is evenly spread with this innovative system. Note that even the fixed angle system gives you already the freedom to choose at what fixed angle you will put your PV or Solar boiler system.  
   
  Ask also for fittings, tubing and so on.   
  SOME TYPICAL PRODUCTS SOLD AS STANDARD FOR SOLAR PV-INSTALLATIONS  
     
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
  We will not show here all, but as you see, even for the DIY people, we have everything and they can take profit from our know-how. Ask info for other accessories or any other question.  
  • Cheap jordan retro 12 pink
  • JKHQLC
  • jordan retro 12 pink
  • JKHQLC
  • nfl jerseys china
  • cheap authentic mlb jerseys
  • cheap jordans shoes
  • JKHQLC
  • new jordan shoes
  • JKHQLC
  • Air Jordan 12 wings
  • Cheap NFL Jerseys